Bobcat S650 - Page 87

85 S650 Operation & Maintenance Manual
ATTACHMENT CONTROL DEVICE (ACD)
This machine may be equipped with an Attachment
Control Device.
Description
Figure 94
Connect the attachments electrical harness to the
attachment control device (Item 1) [Figure 94].
Figure 95
You will need the 14-Pin Attachment Control Device kit
(Item 1) [Figure 95] to operate early model attachments.
See your Bobcat loader dealer.
Standard, ACS And AHC (If Equipped)
Figure 96
SJC (If Equipped)
Figure 97
Additional switches (Items 1, 2 and 3) [Figure 96] or
[Figure 97] on the right and left control handles or
joysticks are used to control some attachment functions
through the attachment control device.
NOTE: ACD takes over the function of auxiliary
hydraulic switch (Item 3) [Figure 96] or
[Figure 97] from Rear Auxiliary Hydraulics
when an attachment electrical harness is
attached to the ACD.
See the appropriate attachment Operation &
Maintenance Manual for control details.
P-85281
1
P-85313
1
P16537C
3
1
P-31833A
2
Left Handle Right Handle
P-24820A
3
1
P-24802A
2
Left Joystick Right Joystick