36 T870 Operation & Maintenance Manual
INTENDED USE
This machine is classified as a Skid-Steer Loader as
defined in ISO 6165. This machine has tracks and
commonly a front mounted bucket for the principle
intended functions of digging, moving, levelling, lifting,
carrying, and loading loose materials such as earth,
gravel, or crushed rock.
Additional Bobcat approved attachments allow this
machine to perform other tasks described in the
attachment Operation & Maintenance Manuals.
Examples of intended use include:
Load, unload and turn on flat level ground. Do not
exceed Rated Operating Capacity (ROC) shown on
sign (decal) in cab. Failure to obey warnings can
cause the machine to tip or rollover and cause injury
or death.
W-2056-1112
Never dump over an obstruction, such as a post, that
can enter the operator cab. The machine could tip
forward and cause injury or death.
W-2057-0694
Never drive forward when the hydraulic control for lift
arms is in float position.
I-2005-1285
Digging Backfilling
Leveling Piling Material
Loading Material Moving Palletized Loads
To Next Page