Bobcat T870 - Page 41

39 T870 Operation & Maintenance Manual
INSTRUMENT PANEL IDENTIFICATION (CONT’D)
Left Panel (Cont’d)
* This manual contains a table with Service Code descriptions. (See DIAGNOSTIC SERVICE CODES on Page 190.)
ITEM DESCRIPTION FUNCTION / OPERATION
12 RIGHT TURN SIGNAL (Option) Indicates right turn signals are ON.
13
DIESEL EXHAUST FLUID (DEF) /
AdBlue® MALFUNCTION
Diesel exhaust fluid (DEF) / AdBlue® level low. (See DIESEL EXHAUST
FLUID (DEF) / ADBLUE® SYSTEM in this manual.)
14 SHOULDER BELT
Instructs operator to fasten shoulder belt when operating in high range.
Remains lit while in high range.
15
HYDRAULIC SYSTEM
MALFUNCTION
Hydraulic system malfunction or failure. (See Service Codes*)
16 FUEL Fuel level low or sensor error.
17
DIESEL EXHAUST FLUID (DEF) /
AdBlue® LEVEL
Shows the amount of diesel exhaust fluid (DEF) / AdBlue® in the tank. (See
SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM in this manual.)
18 FUEL GAUGE Shows the amount of fuel in the tank.
19
LIGHTS without road option
Press once for REAR taillights. (Right green LED will light.) Press a second
time to turn FRONT and REAR work lights ON. REAR taillights will turn
OFF. (Left green LED will light.) Press a third time to turn all lights off. (Left
and right green LEDs will be off.)
LIGHTS with road option
Press once for FRONT boom light, license plate light and REAR taillights.
(Right green LED will light.) Press a second time to turn FRONT and REAR
work lights ON. FRONT boom light, license plate light and REAR taillights
will turn OFF. (Left green LED will light.) Press a third time to turn all lights
off. (Left and right green LEDs will be off.)
Press and hold 5 seconds to show software version in display screen.
20
AUTO IDLE
Press once to engage auto idle. (Left green LED lights.) Press a second
time to disengage. (See AUTO IDLE in this manual.)
Move cursor to the left inside the DISPLAY SCREEN when using certain
INFORMATION button menus.
21
AUXILIARY HYDRAULICS without
high-flow option
Press once to activate the auxiliary hydraulic system. (Left green LED
lights.) Press a second time to deactivate the system.
AUXILIARY HYDRAULICS with
high-flow option
Press once to activate the auxiliary hydraulic system. (Left green LED
lights.) Press a second time to engage the HIGH-FLOW auxiliary
hydraulics. (Left and right green LEDs light.) Press a third time to deactivate
auxiliary hydraulics. (Left and right green LEDs off.)
Move cursor to the right inside the DISPLAY SCREEN when using certain
INFORMATION button menus.
22 INFORMATION
Cycles through (after each button press):
• Hourmeter (On startup)
• Engine rpm
• Battery voltage
• Drive response menu
• Steering drift compensation menu
• Maintenance clock
• Service codes*
23 TRACTION LOCK OVERRIDE
Functions only when the seat bar is raised and the engine is running. Press
once to unlock the brakes. Allows you to use the steering levers or
joystick(s) to move the loader forward or backward when using the backhoe
attachment. (See TRACTION LOCK OVERRIDE in this manual.) Press a
second time to lock the brakes.
24 PRESS TO OPERATE LOADER
Press to activate the BICS™ when the seat bar is down and operator is
seated in operating position. Button will light.
25
PARKING BRAKE (Standard on all
loaders)
Press the top to engage the Parking Brake. Press the bottom to disengage.
(See PARKING BRAKE in this manual.)