bobo's software - offers personalized training programs that
keep track of user performance, progress and achievement.
The Android TV box runs and monitors all the bobo games
and training programs - plus hundreds of free 3rd party ‘tilt
games’ , allows users to choose their preferred content thus
turning exercise and rehabilitation into an enjoyable,
rewarding and challenging activity.
Want to use your own smartphone/tablet?
Search for bobo pro to download the bobo app!
bobo is an affordable training board that mounts on any
balance training platform, turning it into a smart training tool.
By tilting the board, the user controls games and training
programs that are motivating and challenging.
bobo training board
Magnetic charging cable
HDMI cable
Power cable
Android TV box
Mouse
Wall mount kit
01 / Whats in the box?
02 / Software
USER GUIDE
International
March 2021
Power button
Power LED
Charger port
Foot / Hand area
When placing the bobo on a high platform :
Place one foot in the middle of the bobo,
and slowly shift your weight onto it.
Place your free foot just next to
your other foot.
Slide your feet apart slowly, one foot at
a time, without lifting it off the bobo.
Shift your weight back and forth until evenly
balanced. Just standing on the bobo like this
can be a major challenge at first. Holding on
to something sturdy for balance is helpful at
first. Wean yourself of the need for support
one finger at a time as your balance improves.
Now you’re ready to play!
Pairing the bobo with the bobo TV Box:
Pairing is automatic.
Make sure bobo TV box Bluetooth is enabled. bobo will pair
automatically with your device. Do not manually pair the bobo
with your device. If you do, the bobo will not successfully
communicate with the bobo app.
Turn on the bobo, wait 10 seconds and verify that the diagonal
line on the bobo-board sign (top-right corner) had disappeared.
If the bobo-board sign isn't visible, try and adjust your screen
resolution at: Settings > Display > HDMI > Screen Zoom
Pairing the bobo with smartphones and tablets:
Pairing is automatic.
Make sure your smartphone/tablet Bluetooth is enabled.
bobo will pair automatically with your device.
Do not manually pair the bobo with your device.
If you do, the bobo will not successfully
communicate with the bobo app.
Power on the bobo by a short press on the button.
When finished using, power off the bobo by pressing and holding the button:
A long beep will sound and the power LED turns off.
Place the bobo on a cushion or other
appropriate balance platform.
When placing the bobo on a low platform :
Place one foot on one side of the bobo and apply
weight. The bobo will tip toward that foot until the
edge of the board rests on the floor. Shift your
weight entirely onto that leg, holding onto
something sturdy for support if necessary.
Place your other foot on the opposite side of the
bobo, an equal distance from the center.
Note: Do not operate the bobo directly on the floor without
use of a balance platform because the bobo will not
respond without tilt movements.
Shift your weight back and forth until it’s evenly
balanced on the bobo. Standing on the bobo can
present a major challenge at first. Holding on to
something sturdy for balance is helpful at first.
Wean yourself of the need for support one finger
at a time as your balance improves.
03 / Power on! 05 / Stand on the bobo
04 / Pairing to app
Operation status light:
Blue blinks
Use short press to switch between
Landscape and Portrait mode.
Portrait mode
Green blinks Device connected / Landscape mode
Red blinks Low battery
Orange blinks
Charging
Constant orangeFull charge
To Next Page
Need help?
General
