Need help?Do you have a question about the Bobot MOP 9030 and is the answer not in the manual?
General| Brand | Bobot |
|---|---|
| Model | MOP 9030 |
| Category | Steam Cleaner |
| Language | English |
Insert the tube into the upper handle until the spring stud is fully placed.
Insert the tube into the joint of machine until the spring stud is fully placed.
Select mopping cloths (orange/pink) for mopping, waxing cloths (blue/green) for waxing.
Use a measuring cup to fill the water tank with clean water or waxing oil.
Step slightly on the Power Switch to turn the machine on or off. Auto-sleep after 10 mins.
Press Start/Stop to begin/end operation. Press Liquid Spray to dispense liquid.
Three green lights indicate battery level: 100%, 65%, and 30% (low battery).
Use only the original adapter. Charge when only one green light is shown.
Cause: AAA battery runs out. Solution: Replace AAA battery in the remote control.
Cause: Lack of liquid or air in pipe. Solution: Add liquid or press spray button multiple times.
Cause: Blockage or particles. Solution: Clean nozzle gently or rinse with water.
Low battery: Recharge. Overheating: Stop and cool down. Low power: Recharge.
Suitable for smooth floors only. Do not immerse in water or use on walls/windows.
Avoid touching rotating pads. Ensure handle angle is within 80 degrees.
To Next Page