Bobrick Koala Kare KB200-00 User Manual

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. KB200-00 Issued 11/09 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions without notice. © 2009 by Koala Kare Products, A Division of Bobrick.
Koala Kare Products
A Division of Bobrick
HORIZONTAL
WALL-MOUNTED
KB200-00
BABY CHANGING
CREAM
STATION
ADA Compliance
(when properly installed)
4.4.1 Max. Protruding Objects
4.2.5 Forward Reach
4.2.6 Side Reach
4.27.4 Operation
w
Finish Face of Floor
33''
840mm
from floor
max
22-1/8''
562mm
Recommended Mounting Height Off Floor
For Barrier-Free Design
48'' 1219mm
Recommended
Mounting Height Off Floor
44-1/4'' 1124mm
4''
102mm
When Closed
Finish Face of Wall
20''
500mm
35''
890mm
S
S
S
16''
405mm
22''
550mm
Steel-on-Steel Hinge
Pneumatic Cylinder
Mounting Chassis
MATERIALS:
FDA approved injection-molded polypropylene with Microban
®
antimicrobial additive embedded into the bed surface.
Reinforced steel-on-steel hinge mechanism and metal mounting chassis with mounting hardware included. Labelled usage
instructions and safety messages in four languages. Optional Braille label available. Contoured changing surface area is
450 sq. in (11,430 sq. mm) and comes complete with nylon safety strap and bag hooks. Dual cavity liner dispenser holds
approximately 50 KB150-99 bed liners.
continued . . .
Central Restaurant Products

Bobrick Koala Kare KB200-00 Specifications

General

Brand	Bobrick
Model	Koala Kare KB200-00
Category	Baby & Toddler Furniture
Language	English

Summary

Operation and Materials

Materials

FDA approved injection-molded polypropylene with Microban antimicrobial additive. Reinforced steel-on-steel hinge and metal mounting chassis.

ADA Compliance

Details on compliance with ADA regulations for protruding objects, forward and side reach, and operation.

Product Operation and Installation

Operation

Describes controlled opening/closing via pneumatic cylinder and easy-to-clean polypropylene material.

Installation

Guidance for proper installation by qualified personnel onto a permanent wall, ensuring ADA compliance.

Product Specifications

Specifications

Details unit construction, pneumatic cylinder, steel-on-steel hinge, Microban additive, and compliance standards.