To Next PageTo Next Page
Need help?Do you have a question about the Bodor BCL-X series and is the answer not in the manual?
Covers basic, optical, electrical safety, and harm precautions.
Explains machine model coding and nameplate details.
Details main components: shell, drive, optical, control systems, spare parts, toolbox.
Details components for the X and Y axis drive systems.
Installation and handling precautions for the laser tube and its socket.
Details high-tension cable, third reflection mirror, and focus lens.
Overview of different control systems used in the machines.
Visual examples of Leetro and Ruida control panels and boards.
Covers workplace prep, operator readiness, and installation steps.
Details installation of laser tube, water chiller, exhaust fan, and air pump.
Inspection before powering on and the machine's boot sequence.
Adjusting the laser path, mirrors, and focus lens.
Performing trial cuts and adjusting focus for optimal results.
Installation steps for electrical components related to the rotation axis.
Procedure for connecting the rotation axis to the machine's drive.
How to reset the machine's axes using the limit switch.
Initial software setup, vendor tools, and user parameter loading.
Pulse calculation, setup, and operation of the rotary axis.
Step-by-step guide for installing the RDCAM software.
Reading and matching machine parameters with software settings.
Creating graphics, setting layers, and managing files for machine control.
Setting working modes, downloading files, and performing operations.
Basic daily checks, environmental conditions, and water tank care.
Cleaning procedures for exhaust fan, reflectors, and lenses.
Covers water system, support, exit protection, debugging, and high voltage safety.
Diagnosing and fixing problems like no laser, shallow scanning, and unstable light.
Fixing engraving errors, incorrect graphics size, and abnormal equipment resets.
General responsibilities and conditions for machine maintenance.
Specific warranty durations for equipment, laser modules, and consumables.
Procedures and costs for accessory repair and shipping within warranty.
Details on charging standards and processes for door-to-door service.
Recommended cutting parameters for various materials with an 80W laser tube.
Recommended cutting parameters for various materials with a 90W laser tube.
Recommended cutting parameters for various materials with a 130W laser tube.
General