Bodor BCL1309XU - User Manual

Need help?

Do you have a question about the Bodor BCL1309XU and is the answer not in the manual?

Summary

I Safety Knowledge

1.2 Optical Security

1.3 Electricity Security

III Machine Installation

3.1 Before Installation

3.2 Installation Steps

Step-by-step guide for installing the machine components.

3.2.2 Installation of Laser Tube

Step-by-step guide for physically installing the laser tube.

3.2.3 Installation of Water Chiller

3.3 Ground Line Connection

Requirements and procedure for connecting the machine's ground line for safety.

IV Light Path Adjustment

4.1 Pre-Adjustment Checks and Setup

4.2 Laser Path Adjustment

Procedures for adjusting the laser work and light path.

4.2.2 Laser Path Adjustment Methods

Detailed steps and tools for adjusting the laser beam path and focus.

4.2.3 Testing of Engraving

V General Operation User Manual

5.1 Installing Software

Guide for installing the necessary software for machine operation.

5.2 Instructions for machine using

General instructions and guidance for operating the machine.

5.2.1 Read Parameter

Procedure for reading and verifying machine parameters from the software.

5.2.2 Do simple graphics, set the layer

5.2.3 Setting processing method

Setting power, speed, and other parameters based on material.

5.2.4 Download file

5.2.5 Machine operation

Step-by-step guide for operating the machine, including file selection.

5.3 U disk operation

VII CO2 Glass Laser Tube Precautions

7.1 Cooling System Setup and Monitoring

VIII Common Breakdown Maintenance

No Laser Beam During Working

Scanning and Light Performance Issues

Pattern and Movement Problems

Engraving Interruption Issues

Bodor BCL1309XU Specifications

General

Model	BCL1309XU
Technology	Laser
Working Area	1300mm x 900mm
Laser Power	100W
Connectivity	USB

Related product manuals

Bodor BCL-B Series

52 pages