Body Armor 4x4 5145 User Manual

INSTALLATION INSTRUCTIONS
Page 1 of 4
Jeep Door Storage Bar
PART#5145
PARTS LIST:
1
Door Storage Bar
2
5/16in Wood Screws
4
Wrangler JL/JK 12mm Bushings
2
5/16in Lock Washers
4
Wrangler TJ 10mm Bushings
2
5/16in Flat Washers
2
Striker Plate Brackets
4
4mm x 20mm Button Head Bolts
2
Standoffs (Door Latch Pins)
4
4mm x 12mm x 1.0mm Flat Washers
4
Door Hinge Brackets
4
4mm x 20mm Wood Screws
4
8mm x 55mm Hex Bolts
4
4mm Lock Washers
10
8mm x 16mm x 1.6mm Flat Washers
4
4mm x 8.65mm x 0.8mm Flat Washers
4
8mm Nylon Lock Nuts
1
4mm Hex Wrench
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS REQUIRED.
1. Find a wooden stud in the wall in the selected location. Hold up the Door Storage Bar to the wall. Level,
adjust and mark both upper and lower screw locations. Drill a pilot hole in marked locations.
(2) Striker Plate Brackets
(4) Door Pin Brackets
(2) Standoffs
(4) 10mm Bushings
(For the TJ)
(4) 12mm Bushings
(For the JK and JL)
Door Storage Bar

Body Armor 4x4 5145 Specifications

General

Material	Steel
Finish	Black Powder Coat
D-Ring Mounts	Yes
Brand	Body Armor
Model	5145
Compatibility	Jeep Wrangler JK (2007-2018)
Light Mounts	Yes

Summary

Jeep Door Storage Bar Installation

Parts List Overview

Lists all components and hardware required for installation, including quantities.

Procedure - Wall Preparation

Instructions for locating a wall stud, marking, and drilling pilot holes for mounting.

Procedure - Mounting Plates

Details on attaching the upper and lower mounting plates to the wall securely.

Procedure - Hinge Bracket Attachment

Steps for attaching hinge brackets to the storage bar and vehicle doors.

Procedure - Bushing Installation

Guide for inserting specific bushings into hinge bracket holes for JK, JL, and TJ models.

Procedure - Standoff and Striker Plate Setup

Instructions for attaching standoff pins to striker brackets and mounting striker plates to the wall.

Procedure - Final Checks

Recommendation for periodic inspections to ensure all hardware remains secure and tight.