BodyCraft GXP - Assembly Step 1: Main Frame

STEP I ASSEMBLE MAIN FRAME
To ease assemtly, Do Nolli[fllen 31Y bolts until inslnrled
1 Altac~ l~ Connecbng Rear Stabilizer (202) to l~ GXP Base
Frame (1), using two 3/8" X 3/4' Hex Bolls (234), two 3/8" Washers
(238)
2 Attach Pulley Bracket (200) to the GXP Rear Stabilizer (3), using
two 1/2' X 5' Hex Bolls (226), four 1/2" Washers (237) am two 1!2"
Nj10n Nuts (239)
,