What to do if the speed is not displayed on my Bodyguard Elliptical Trainer?
If your Bodyguard Elliptical Trainer's computer lights up but the speed isn't displayed, the speed sensor might be misaligned or improperly connected. Try aligning or replacing the speed sensor, and check its connection. Also, examine the cable between the computer and the control card for any damage; replace it if necessary.
How to fix a Bodyguard E390X when the computer won't turn on?
First, ensure the Bodyguard Elliptical Trainer is plugged in. Check the power cord to confirm it's working correctly and replace it if needed. Then, inspect the computer cables. If these steps don't solve the issue, contact a qualified electrician.
Why is there no resistance on the pedals of my Bodyguard E390X?
If your Bodyguard Elliptical Trainer's computer lights up, but you feel no resistance on the pedals, the cable between the braking system and control card or the cable between the computer and control card may be damaged or improperly connected. Check these cables.
What to do if my Bodyguard E390X computer won't light up when pedaling?
If the computer on your Bodyguard Elliptical Trainer doesn't light up when pedaling, you need to reach 15 rpm to activate the screen. Also, check the computer cables and charge or change your battery.
General| Brand | Bodyguard |
|---|---|
| Model | E390X |
| Category | Elliptical Trainer |
| Language | English |
To Next Page
