EasyManua.ls Logo

BODYMAX MB40 - 2.4.1 Adjusting the Pedal Belt; 2.4.2 Adjusting the Resistance; 2.4.3 Emergency Brake Function

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MB40
17
2.4 Adjustments
2.4.1 Adjusting the pedal belt
+ If the pedal strap is too tight, push the buckle and pull the strap upwards to loosen it. (Fig. A).
+ If the pedal strap is too loose, push the buckle and pull the strap down to pull it tighter (Fig. B).
2.4.2 Adjust the resistance
+ To increase the resistance, turn the knob (52) (“+”)
clockwise (A).
+ To decrease the resistance, turn the knob (52) (“-”)
counterclockwise (B).
2.4.3 Emergency brake function
+ The brake handle (19) is an emergency brake. Use
this safety function in any situation where you
need to get o the bike or stop the indoor cycle
ywheel. During exercise, press the brake lever
rmly (19) to stop the Indoor Cycle immediately.

Related product manuals