- 17 -
V. HRC function： (This function must be attached with heart beat to finish)
2.1. The program aims to exercise heartbeat. When operating, the heartbeat value is equal
to the pre-set value, the angle and speed will keep steady to maintain the heartbeat
value in certain range to achieve the exercising effect.
2.2. When the MANUAL LED is blinking, press “ or ＂ until the
HRC LED you want stops blinking. Press to make sure. At this time, LCD
of HRC will stop blinking and continue to light. The program will order you to put
in value according to operating style below.
2.3. LCD of AGE light flashes, you can press or to adjust age. After
setting, press
to another position.
Age Pre-set：30
Range of age：13~80，Step is 1
2.4. At this time LCD of PULSE light flashes, the mode will request you to put in
heartbeat value. The value will change according to the age and please refer to the
attached table in the rear of this indication. Then select the suitable value in the table.
You can press or to adjust heartbeat value. If you don’t make any
change, press
and mode will start according to pre-set value and turn to next
position.
2.5. TIME window starts flashing, mode will request you to put in time value. You can
press or to set sport time you need. Or press directly to
start move with no count back.
Range of time value：20~99 min
To Next Page
Loading...