BODYTONE ACTIVE BIKE 200 CONNECT - User Manual

USER MANUAL
ACTIVE BIKE 200 CONNECT
ON
Install the batteries; The console monitor will light up for two seconds and
beep twice.
SPORTS MODE
Once turned on, the console is programmed into sports mode.
1. Press the MODE button to adjust the TIME/DISTANCE/CALORIES/PULSE
parameters. Then press SET to confirm the setting. Then, press the
MODE button again to start the exercise.
2. At the beginning of the exercise, the values of TIME/ DST/ CAL/ WATT will
start counting backwards.
3. If you need to check your heart rate, put the strap on your chest correctly
(5.3 K frequency). The console will detect your heart rate signal and
display it in the PULSE window.

Summary

Button Functions

Mode Button

Controls display windows and parameter confirmation.

Reset Function

Clears current settings or restarts the console when held.

Up Button

Increases parameter settings or navigates through options.

Down Button

Decreases parameter settings or navigates through options.

Console Commissioning

Power On Sequence

Initial console activation upon battery installation, indicated by lights and beeps.

Sports Mode Operation

Starting Sports Mode

Adjust parameters using MODE and SET, then press MODE again to begin exercise.

Exercise Counting

TIME/DST/CAL/WATT values count backwards at the start of exercise.

Heart Rate Monitoring

Use chest strap (5.3 K frequency) for the console to detect and display heart rate.

System Warnings

Low Battery Indicator

Monitor will turn off; change the battery when low.

Signal Input Check

Verify wire connections and sensor rod integrity if no input signal is detected.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
   1. MODE Button
   2. RESET Button
   3. UP Button
   4. DOWN Button
   5. Commissioning
   6. Sports Mode Operation
4. Maintenance Features

This document is the user manual for the "ACTIVE BIKE 200 CONNECT" by Bodytone. It provides instructions for operating and maintaining the exercise bike's console.

Function Description

The Active Bike 200 Connect is an exercise bike designed for home or commercial use, featuring a console that displays various workout metrics. The console allows users to monitor their progress and adjust settings during exercise.

Important Technical Specifications

The manual primarily focuses on the console's functionality rather than the bike's mechanical specifications. However, it does mention the console's ability to detect heart rate signals from a chest strap with a 5.3 KHz frequency.

Usage Features

The console offers several buttons for controlling its functions:

MODE Button

• Function: Turns on the TIME/DISTANCE/CALORIES/PULSE display window.
• Setting Confirmation: Confirms the setting of the selected parameter.
• Sports Mode: In sports mode, pressing MODE adjusts the TIME/DISTANCE/CALORIES/PULSE parameters. After setting, pressing SET confirms, and pressing MODE again starts the exercise.

RESET Button

• Clear Setting: A single tap clears the current setting.
• Console Restart: Pressing and holding for 3 seconds restarts the console.

UP Button

• Increase Parameter: A single click increases the setting of the selected parameter.
• Rapid Adjustment: Pressing and holding quickly increases the parameter adjustment.
• Parameter Setting: Used to set TIME/DISTANCE/CALORIES/PULSE parameters.

DOWN Button

• Decrease Parameter: A single tap decreases the setting of the selected parameter.
• Rapid Adjustment: Pressing and holding quickly decreases the parameter adjustment.
• Parameter Setting: Used to set TIME/DISTANCE/CALORIES/PULSE parameters.

Commissioning

• Power On: The console powers on when batteries are installed. It will light up for two seconds and emit two beeps.

Sports Mode Operation

• Initial State: Once powered on, the console is programmed into sports mode.
• Parameter Adjustment: Users can adjust TIME, DISTANCE, CALORIES, and PULSE parameters using the MODE button.
• Exercise Start: After confirming settings with the SET button, pressing MODE again starts the exercise.
• Countdown: At the beginning of the exercise, TIME, DST (Distance), CAL (Calories), and WATT values will count down if set.
• Heart Rate Monitoring: To check heart rate, a chest strap (5.3 KHz frequency) must be worn correctly. The console will detect the heart rate signal and display it in the PULSE window.

Maintenance Features

The manual outlines important warnings related to the console's maintenance:

• Battery Replacement: The monitor will turn off when the battery is low, indicating that the battery needs to be changed.
• Signal Troubleshooting: If there is no input signal, users should check that the wires are securely connected and that the sensor rod is not removed or damaged.

BODYTONE ACTIVE BIKE 200 CONNECT Specifications