To Next PageTo Next Page
Need help?Do you have a question about the Boge SF 60-2 and is the answer not in the manual?
General| Brand | Boge |
|---|---|
| Model | SF 60-2 |
| Category | Compressor |
| Language | English |
Guidelines for safe operation of the compressor, including intended use and pressure limits.
Procedures and precautions for safe maintenance and repair activities.
Observance of national regulations for accident prevention in compressor operation.
Specifications for S 40-2 to S 100-2 series, covering dimensions, weight, and noise levels.
Specifications for S 101 to S 341 series, covering dimensions, weight, and noise levels.
Switches off compressor if max temperature is reached or min temperature is not.
Prevents over-pressurization of the compressed air/oil receiver.
Safety warnings for electrical work and connecting to the power supply.
Procedure to check and correct drive motor rotational direction.
Overview of fault causes and rectification, emphasizing trained personnel.
Addresses issues like no delivery, no pressure build-up, or low maximum pressure.
Troubleshooting steps for when the compressor fails to start.
Emphasizes work by specialists and proper refitting of cladding.
Details steps like switching off, isolating, venting, and removing cladding.
Steps for reattaching cladding, opening valves, and final checks.
Table outlining maintenance tasks and intervals based on operating hours.
Steps for checking and topping up the oil level.
Procedure for changing the oil filter after specified operating hours.
Instructions for changing the oil separator, including warnings.
Detailed steps for performing an oil change, including pressure cushion and draining.
Procedure for checking the safety valve's function.
