Boge S 40-2 User Manual

Operating
instructions
Belt-driven
screw compressors
S 40-2 ... S 341
SF 40-2 ...SF 220 series
Before installation or starting the
compressor for the first time, this
manual should be studied carefully to
obtain a clear knowledge of the unit
and of the duties to be performed while
operating and maintaining the unit.
RETAIN THIS MANUAL WITH UNIT.
This Technical manual contains
IMPORTANT SAFETY DATA and should
be kept with the air compressor at all
times.
separate manuals:
compressor control /
frequency converter

Boge S 40-2 Specifications

General

Type	Screw Compressor
Model	S 40-2
Nominal motor power	30 kW
Maximum pressure	10 bar
Power	30 kW

Summary

Part 1: General

1.1 General Safety Instructions

Essential safety guidelines for compressor operation and maintenance.

1.2 Introduction

Overview of symbols, intended use, and manual purpose.

Part 2: Product Description

2.1 Technical Data

Detailed specifications for compressor models, dimensions, and performance.

2.2 Function Description

Explanation of air end, air circuit, and oil circuit operations.

2.5 Safety and Monitoring Devices

Description of safety features like temperature limits and safety valves.

Part 3: Installation

3.2 Compressor Room

Requirements for installation surface, fire protection, and ventilation.

3.4 Electrical Connection

Instructions for safe electrical hookup and considerations for frequency converters.

3.5 Commissioning

Procedures for initial startup, including checks and trial runs.

Part 4: Faults

4.2 General Faults

Common faults, possible causes, and rectification measures.

Part 5: Maintenance

5.1 Safety Instructions

Critical safety precautions before performing maintenance work.

5.3 Regular Maintenance Work

Detailed procedures for routine maintenance tasks like filter changes.

Appendix

6.1 Flow Chart

Diagrams illustrating air-cooled and water-cooled system configurations.