Boge S Series User Manual

Operating
instructions
Belt-driven
screw compressors
S 40-2 ... S 341
SF 40-2 ...SF 220 series
Before installation or starting the
compressor for the first time, this
manual should be studied carefully to
obtain a clear knowledge of the unit
and of the duties to be performed while
operating and maintaining the unit.
RETAIN THIS MANUAL WITH UNIT.
This Technical manual contains
IMPORTANT SAFETY DATA and should
be kept with the air compressor at all
times.
separate manuals:
compressor control /
frequency converter

Boge S Series Specifications

General

Type	Screw Compressor
Drive	Direct drive
Cooling	Air / Water
Pressure	13 bar
Noise Level	78 dB(A)

Summary

General Safety Instructions

Safety Instructions for Compressor Operation

Essential safety guidelines for operating the compressor safely and correctly.

Safety Instructions for Maintenance and Repair

Critical safety procedures to follow before performing any maintenance or repair work.

Product Description

Function Principle of the Air End

Compressor Control and Operation

Safety and Monitoring Devices

Outlines essential safety features and monitoring systems integrated into the compressor.

Installation

Transport and Handling Guidelines

Compressor Room Requirements

Electrical Connection Procedures

Critical safety and procedural guidelines for connecting the compressor to electrical power.

Commissioning Procedures

Steps for initial startup, checking rotation, leaks, and conducting a trial run.

Faults and Troubleshooting

General Fault Diagnosis

Common Compressor Faults and Rectifications

A table listing common faults, their possible causes, and recommended rectification measures.

Maintenance

Safety Instructions for Maintenance

Mandatory safety precautions to be strictly followed before and during all maintenance tasks.

Maintenance Intervals and Schedule

Regular Maintenance Tasks

Oil Change Procedure