Boge S 100-2 User Manual

Operating
instructions
Belt-driven
screw compressors
S 40-2 ... S 341
SF 40-2 ...SF 220 series
Before installation or starting the
compressor for the first time, this
manual should be studied carefully to
obtain a clear knowledge of the unit
and of the duties to be performed while
operating and maintaining the unit.
RETAIN THIS MANUAL WITH UNIT.
This Technical manual contains
IMPORTANT SAFETY DATA and should
be kept with the air compressor at all
times.
separate manuals:
compressor control /
frequency converter

Boge S 100-2 Specifications

General

Brand	Boge
Model	S 100-2
Category	Compressor
Language	English

Summary

General

General Safety Instructions

Provides essential safety guidelines for operating and maintaining the compressor.

Maintenance and Accident Prevention Safety

Details safety procedures for maintenance, repair, and accident prevention.

Usage Guidelines and Warnings

Product Description

Technical Data S 40-2 to S 100-2 (Part 1)

Presents detailed technical specifications for S 40-2 to S 100-2 compressor models.

Technical Data S 101 to S 341 (Part 1)

Provides technical specifications for S 101 to S 341 compressor models.

Technical Data S 40-2 to S 100-2 (Part 2)

Continues technical specifications for S 40-2 to S 100-2 compressor models.

Technical Data S 101 to S 341 (Part 2)

Technical Data SF 40-2 to SF 220 (Part 1)

Presents technical specifications for SF 40-2 to SF 220 compressor models.

Technical Data SF 40-2 to SF 220 (Part 2)

Function Principle and Air Circuit

Compressor Control States and Modes

Safety and Monitoring Device Functions

Cooling Water Requirements and Quality

Installation

Compressor Room Requirements

General Installation and Connection Procedures

Cooling Water Connection and Transport Bolt Removal

Belt Tensioning and Oil Level Check

Electrical Connection Safety

Covers essential safety and connection procedures for electrical power supply.

Commissioning Steps

Covers rotational direction check, leak checking, trail run, and opening stop valves.

Faults

General Faults Introduction

Common Faults and Rectification

Lists common faults, their possible causes, and rectification procedures.

Maintenance

Safety Instructions for Maintenance Work

Essential safety precautions to be observed before and during maintenance work.

Maintenance Intervals Schedule

Table detailing maintenance intervals based on operating hours and conditions.

Lubricant Information

Disposal of Used Operating Material

Intake Filter Maintenance

V-belt Maintenance

Belt Tensioning and Oil Level Checks

Belt tensioning device settings and initial oil level checking procedure.

Checking and Topping Up Oil Level

Detailed procedure for checking and topping up the compressor oil level.

Oil Filter Replacement

Step-by-step guide for changing the oil filter.

Oil Separator Replacement

Procedure for changing the oil separator.

Oil Change Procedure

Procedure for performing an oil change on the compressor.

Filling with New Oil

Safety Valve Check