Model MCDS4
Administrative Telephone Operating Instructions
©2007 Bogen Communications, Inc.
All rights reserved.
54-5031-01G 1509
The Bogen Model MCDS4 is a 12-push-
button, touch-tone type telephone
designed for use as an administrative
telephone in Bogen communications
systems. It incorporates an LCD display
panel and unique display menu system to
provide rapid, efficient and reliable control
over the system’s operational functions.
The MCDS4 also includes nine dedicat-
ed function pushbuttons and three pro-
grammable function buttons. The dedicat-
ed functions include: Speed Dial of up to
10 frequently dialed numbers, Redial last
number, Speakerphone (for hands-free
conversation), Line (to get dial tone when
using the speaker), Hold, and Speaker
Volume Control. The programmable func-
tion buttons can be used to direct dial a
frequently called number or to activate one
of the system’s communications func-
tions (alarm, external relay, etc.).
The MCDS4 provides five different ring
signals to distinguish call alert, normal,
urgent, emergency calls, and incoming
outside line calls. It is fully compatible with
the MCTC Board option and, when con-
nected to a Multicom 2000 system’s
RS485 interface, can display the status of
the first 8 outside lines and hold status for
those lines.
The phone may be mounted on a wall or
desktop. It includes a pull-out number
index and a replaceable coil cord.
1. ADDITIONAL MCDS4’s CAN BE CONNECTED IN PARALLEL, TO EITHER PINS 1 & 2
OR 3 & 4 ON MC2000 BACKPLANE CONNECTOR P8 (MULTICOM 2000 ONLY).
2. FOR MCPCA2 MICROPROCESSOR CARD SET, JUMPER JMP1 TO THE
“ON” POSITION. COM 2 PORT USED FOR OUTSIDE LINE STATUS ONLY.
3. ACTUAL MODULAR BLOCK TERMINALS MAY NOT FOLLOW ORDER AS SHOWN
ON DIAGRAM - USE COLORS AS REFERENCE, NOT POSITIONS.
NOTES
To Next Page
General