Need help?Do you have a question about the Bogen MULTICOM 2000 and is the answer not in the manual?
General| Type | PBX |
|---|---|
| Maximum number of stations | 24 |
| Number of Lines | 8 |
| Number of Extensions | 24 |
| Features | Call transfer, conference calling, hold, paging, music on hold |
| Connectivity | Analog |
| Lines | 8 |
| Extensions | 24 |
| Power Supply | 120V AC |
Describes the cabinet-mounted system configuration using MCMF card frame and MCRC relay cards.
Details the rack-mounted system using MCRMF card frame and MCRM relay module, supporting up to 120 stations.
Explains rack-mounted systems with Multi-Graphic equipment for advanced capabilities.
Complete back box assembly for cabinet-mounted systems.
Lists components mounted on the MCMP plate for cabinet system assembly.
Lists available equipment rack sizes (TCPER series) for system mounting.
Details components like MC512B, MC2626B, MCAPI2 mounted on MCRMP panel.
Describes MCRMF mainframe and MCRM relay modules for rack systems.
Lists MCP35A control panel and SBA225 switchbank for Multi-Graphic systems.
Guidelines for selecting an appropriate installation location for the system.
Specifies cable type and termination requirements for station wiring.
Mandatory safety precautions during installation and wiring procedures.
Details AC power connection for wall-mounted units, including safety terminals.
Instructions for mounting the back box on a wall surface.
Instructions for recessing the back box into a wall.
Steps for installing the system assembly panel into the back box.
Wiring diagram for power supplies and relay card connections in cabinet systems.
Guidance for selecting rack location and power for rack-mounted systems.
Details on MC512B and MC2626B power supplies for rack systems.
Information on MCRM relay modules and MCRCA ribbon cables for rack systems.
Recommends Bogen S86 loudspeaker and details cable termination for warranty.
Describes the MCPCA3 processor card, the system's functional heart.
Details the MCSC station card for telephonic switching and talk battery circuits.
Explains the MCACB analog card for amplification and relay control.
Specifications for the MC512B regulated, switching power supply.
Specifications for the MC2626B unregulated power supply.
Describes the MCTCA card for adding external telephone capacity and its connection.
To Next Page