EasyManua.ls Logo

Bogen NQ-E7030 User Manual

Bogen NQ-E7030
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Analog Station Bridge
Configuration Guide
NQ-E7030
© 2018–2021 Bogen Communications, Inc.
All rights reserved.
740-00015G
211012
Question and Answer IconNeed help?

Do you have a question about the Bogen NQ-E7030 and is the answer not in the manual?

Bogen NQ-E7030 Specifications

General IconGeneral
TypeNetwork Camera
CompressionH.264, MJPEG
Ingress ProtectionIP66
ProtocolsIPv4, IPv6, HTTP, HTTPS, TCP, UDP, RTSP, DHCP, NTP, DDNS, SMTP, FTP, UPnP, SNMP
ConnectorsRJ45
PowerPoE (IEEE 802.3af)
Day/NightIR cut filter with auto switch
Ethernet Port10/100 Mbps
Power SupplyPoE (IEEE 802.3af)

Summary

Configuring the Analog Station Bridge

Using the Dashboard

The ASB dashboard displays status information, LEDs, and temperature. It allows temporary volume adjustments using a slider.

Updating Firmware

Details the process of checking for, uploading, and installing new firmware versions, as well as restoring factory settings and rebooting.

Network Settings Tab Parameters

Explains manual configuration of network settings like IP Address, Netmask, Gateway, and VLAN ID via the appliance's web UI.

Configuration Settings Tab Parameters

Covers retrieving configuration settings from the Nyquist server, including web username, IP addresses, port numbers, and station lists.

Accessing Log Files