10
To view the Nyquist appliance configuration:
1 On the appliance Web UI’s main page, select Configuration Settings.
2 View the configuration settings.
Figure 5. Configuration Settings for ASB
Table 6. Configuration Settings
Get Configuration from
Server
Retrieves configuration settings (i.e., web username,
server, and local port) from the TFTP server specified in
the Network Settings (see
Table 1 on page 1).
Web Username Displays
the web username for this appliance.
E
mergency-All-Call Identifies the IP address, port number, cut level (vol-
ume), and station list used for emergency all-call pages.
All-Call Identifies the IP address, port number, cut level (vol-
ume), and station list used for all-call pages.
Audio Distribution Identifies the IP address, port number, cut level (vol-
ume), and station list used for audio distribution.
To Next Page
Loading...