The Bogen model TAMB telephone interface module can be used to make a remote page through the telephone
system.
A Bogen TP-AP Series Interphone can be used to make a remote page. The figure below shows the connec-
tion.
14
Note: Jumper J3 on the MCP35A printed
circuit board must be set to the TELCO
position. See the Special Adjustments sec-
tion for jumper information.
Note: Jumper J3 on the MCP35A printed cir-
cuit board must be set to the TELCO position.
See the Special Adjustments section for
jumper information.
To Next Page
Loading...