Need help?Do you have a question about the Bogen ADP1 and is the answer not in the manual?
Power and Connectivity| power requirement | 18V DC / 20 mA minimum |
|---|---|
| ring voltage | 40V AC RMS minimum |
| ringer equivalence number | 0.7A |
Dimensions and Weight| unit dimensions without bezel | 5" W x 5" H x 1[3]/4" D |
|---|---|
| unit dimensions with bezel | 6[1]/4" W x 6[1]/4" H x 1[3]/4" D |
| product weight | 4 lb. |
Lists items included in the ADP1 package, such as the unit, screws, wrench, bezel, and gasket.
Analog station line connection via RJ11, not polarity sensitive.
Adjusts speaker volume level. Clockwise rotation increases volume.
Adjusts microphone return talk level. Clockwise rotation increases level.
Mutes audio when only background noise is detected.
Indicates unit is active (off hook) when lit during installation/troubleshooting.
Configures automatic call disconnect time (15s to 2 min) or unlimited.
Allows the unit to automatically answer incoming calls via a jumper.
Connects the ADP1 to the phone system analog station line via RJ11 or terminals.
Connect a protective Earth Ground to the spare lug for increased surge protection.
Instructions for flush mounting the ADP1 indoors or outdoors, including sealing and screw attachment.
Instructions for surface mounting the ADP1, advising against using the bezel.
To Next Page
