Specifications
11
Output Level
Balanced: Selectable +4, -10, -50 dBµ (typical when meter reads “0”)
Unbalanced: 0 dBµ (typical when meter reads “0”)
Max. Output Level
Balanced: +18 dBµ
Unbalanced: +20 dBµ
Frequency Response: +/- 1 dB (20 Hz to 20 kHz)
Distortion: 0.01 (@ +18 dBµ THD+N, 20 Hz to 20 kHz BW Limited)
Signal-to-Noise
Fundamental: -99 dB*
w/ AUX MAX1R Module: -94 dB*
w/ MIC2X Module: -64 dB*
w/ TEL1S Module: -92 dB*
Tone Controls
Bass Frequency: 100 Hz (+/- 10 dB minimum)
Treble Frequency: 10 kHz (+/- 10 dB minimum)
Low Cut Frequency: 125 Hz @ -6 dB/octave
Signal / Clip Indicator
Signal Detect Threshold: 10 mV @ output of module
Signal Indicator Hold Time: 50 mS (green indicator)
Clip Detect Threshold: 6V @ output of module
Clip Detect Hold Time: 50 mS (red indicator)
Output Impedance
Balanced: 50 ohms @ +4 dBµ, 600 ohms @ -10 dBµ, 5 ohms @ -50 dBµ
Unbalanced: 100 ohms
Power Consumption: 21 watts
AC Power Receptacle: 500 watts maximum power, unswitched
Dimensions: 17-1/4" W x 3-7/8" H x 14-3/4" D
Product Weight: 15 lb.
Safety Approvals: Listed to UL Standard 60065 for U.S. and Canada
* Referenced to max output level, 20 Hz to 20 kHz bandwidth limited.
All specifications subject to change without notice.
To Next Page
Loading...