Bogue Systems BJC-1259 User Manual

SPECIFICATIONS:
NAME
Ultrasonic Cleaner
POWERSUPPLY
AC 100-120 V, 60 Hz
ITEM No. BJC-1259 INPUT POWER 35W
DIM.
20 x 12.5 x 4 em TIMER sETIING 3 minutes
TANK SIZE
600ml WT
780g
Ultrasonic Cleaner
BJC-1259
User Instruction
Manual
• READ ALL INSTRUCTIONS
BEFORE USING
• SAVE THESE INSTRUCTIONS
The vibrating of washing
liquid caused by Ultrasonic
wave cleans off dust,
smeary bits and dirt on the
surface.
Features:
35watts of PURE
ULTRASONIC Power
42,000 cycle energy wave
quiet, solid state circuitry
3 minutes auto shut off
IMPORTANT SAFEGUARDS I
READ ALL INSTRUCTIONS BEFORE USING
~ DANGER-To reduce the risk of electrocution:
1. Always unplug this product immediately after using.
2. Do not use while bathing.
3. Do not place ro store product where it can fall or be pulled into a tub or
sink.
4. Do not place in or drop into water or other liquid.
5. Do not reach for a product that has fallen into water. Unplug immediately.
6. The product may be off or can't be switched off when it is subjected to
electromagnetic interference like Fast Transients or Surge voltage, but it
can recover after being re-plugged in the socket, and then just follow the
instruction described in this manual to set the function again for normal
operation.
IC\ WARNING-To reduce the risk of burns, electrocution, fire,
\.::y or injury to persons.
1. A product should never be left unattended when plugged in.
2. Close supervision is necessary when this product is used by, on, or near
children or invalids.
3. Use this product only for its intended use as described in this manual.
Do not use attachments not recommended by the manufacturer.
4. never operate this product if it has a damaged cord or plug. If it is not
working properly, if it has been dropped or damaged, or dropped into
water. Return the product to a service centre for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never use while sleeping or drowsy.
7. Never drop or insert any object into any opening or hose.
8. This appliance is not intended for used by persons (including) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.

Bogue Systems BJC-1259 Specifications

General

Brand	Bogue Systems
Model	BJC-1259
Category	Ultrasonic Jewelry Cleaner
Language	English

Summary

Important Safeguards

Danger: Risk of Electrocution

Precautions to reduce the risk of electrocution, including unplugging after use and avoiding water.

Warning: Risk of Burns, Electrocution, Fire, or Injury

Safety guidelines for unattended use, supervision, proper usage, cord care, and appliance maintenance.

Cautionary Notes for Operation

Cleaning Material and Water Level

Avoid organic solvents, abrasives, and overfilling the tank to prevent damage or overflow.

Operational and Maintenance Precautions

Do not dissect the unit, prohibit washing the whole unit with water, and follow recommended cleaning cycles.

Specific Item Handling

Be aware that inlaid studs may shed and unfastened parts may detach; do not immerse non-waterproof watches.

Product Drawing and Indication

Component Identification

Diagram showing the ultrasonic cleaner's parts like the upper cover, tank, circuit board, and indicator lights.

Operation Guidance

Step-by-Step Cleaning Process

Instructions for filling the tank, closing the cover, starting cleaning, and stopping the unit after 3 minutes.

Cleaning Methods

General Cleaning

Use tap water to clean items, ensuring the water level covers the article without exceeding the ruling mark.

Enhanced Cleaning

For professional use, employ special cleaning liquids or add a few drops of detergent to water for better results.

Partly Cleaning

Method for cleaning larger articles by partially immersing them as illustrated.

User Maintenance

Post-Cleaning Procedures

Remove items promptly, unplug before draining, empty the tank after each use, and wipe the tank dry.

Storage and Repair

Keep the unit cool and dry, and ensure all repairs are performed by authorized service centers.