BOHLT EKICK 8 PRO - Page 5

5
3. Pull up the grips
4. Loosen the t-tube locknut (9)
5. Pull out the t-tube to the desired
height, it will be locked by means of
the position buttons (5) in the lower t-
tube (4)
6. Tighten the locknut (9)
Folding the e-scooter
1. Turn off the power by pushing the
power switch
2. Pull out horizontally the two grips
from the handlebar
3. Fold down the grips
4. Loosen the locknut
5. Push down the t-tube to its lowest
position.
6. push down the folding lever