The charger has overcharge protection function, the battery will stop charging automatically
after 100% full charge.
CHARGER
1. Firstly, insert the charger into the charging port.
2. Then connect the charger to the power supply (AC100-240V).
3. After connection, if the indicator light shows red means in charging; If the indicator light
shows green means full charged.
Charging operation guide
Charging port position
Charger port
PROMPT:
Make sure all connectors are in the correct position when charging.
If the fault or damage is caused by the following reasons, even within
the warranty period, it is not covered by the warranty:
1. Failing to use and maintain according to the user manual.
2. Damage caused by dangerous behavior or violation of laws and
regulations.
3. Refit scooter at will, using non-original parts.
4. Riding on irregular roads.
5. Used for commercial or rental purposes and not used properly.
6. The force majeure.
7. Long-term exposure to the outside causes product aging and fault.
09
To Next Page
Loading...
