BOHLT EKICK 9 PRO - Troubleshooting

TROUBLE SHOOTING
Problem Possible Reason
Solution
The scooter does not
move after startup.
The brake is not fully reset.
This cuts off the power.
Reset the brake into
position.
Scooter moves at low speed,
or doesnot move at all.
The battery is low. Recharge the battery.
The battery life cycle is
at its end.
Change a new battery.
The charger does not
output anypower.
Change the charger.
The scooter battery
does not charge.
The charging port is
damaged.
Change the charging port.
The battery cannot be
charged or it’scharged slowly.
The voltage is not correct.
Do battery maintenance or
change the battery.
Recharge the battery.
Controller is damaged. Change a new controller.
The motor will start
and shut downagain.
The battery connection
is loose.
Adjust the connectors of
battery.
Riding range is too short
for a full charge.
The battery life cycle is
at its end.
Change a new battery.
The battery is low.
10