Need help?Do you have a question about the Bolens 2087 HT 20 and is the answer not in the manual?
Details for locating tractor and engine serial numbers for identification.
Provides detailed technical specifications for various tractor models.
Wiring diagram for models 1886s-05 and 06.
Schematic of the light circuit for models 1886s-05 and 06.
Schematic of the start-run circuit for models 1886s-05 and 06.
Schematic of the charging circuit for models 1886s-05 and 06.
Wiring diagram for models 2086 & 2087 within a specific serial number range.
Wiring diagram for models 2087 (later serials) and 2389.
Wiring diagram for model 2389s with serial numbers 0100101 and later.
Schematic of the light circuit for models 2086, 2087, 2389 & 2389s.
Schematic of the start-run circuit for models 2086 & 2087 (specific serial range).
Wiring diagram for models 2288 & 2289 within a specific serial number range.
Wiring diagram for model 2388s.
Procedures for testing the battery, including specific gravity and voltage.
Procedure for testing the battery and charging system.
Procedures for testing hydrostatic system pressure and charge pump.
Step-by-step instructions for removing and installing the hydrostatic unit.
Procedures for testing and repairing Eaton hydrostatic transmissions.
Instructions for removing and installing Eaton hydrostatic transaxles.
Repair procedures for Sundstrand hydrostatic units and charge pump removal.
Disassembly procedures for two-speed and high/low range transaxles.
Instructions for transaxle assembly and checking clearances.
Detailed assembly procedures for the transaxle.
Steps for assembling the transaxle, including gear placement.
Procedures for testing the Sundstrand hydraulic system pressure.
Procedures for testing the Eaton hydraulic system pressure.
Troubleshooting guide for common engine problems and their remedies.
Instructions for removing the engine.
Detailed steps for removing and reinstalling engines on models 2289 & 2288.
Continuation of engine removal and reinstallation procedures.
Final steps for engine removal and reinstallation, including wiring.
To Next Page
General