Bolens 500E - Introduction to Bolens Snow Thrower

INTRODUCTION
Thank you for purchasing this piece of
Bolens equipment. We feel you now own
one of the finest pieces of equipment
money can buy.
This is a safety, operation and general
maintenance manual which does not at¬
tempt to cover major repairs. Bolens
equipment has been carefully designed,
engineered and manufactured to give
good performance if properly operated
and maintained. Review this manual to
familiarize yourself with the unit, its
features and its operation.
This equipment is manufactured by Bolens
Corporation, 215 South Park Street, Port
Washington, Wisconsin 53074. (Phone:
414-284-5521). If you should have any
questions or encounter any problems
which you feel only the factory can
solve, write to the above address or
call our Service Department.
Your Warranty Statement is also included
(on back cover) with this manual. Please
read it carefully. Also, be sure to complete
and return the included postpaid owner
registration card. The purpose of this
card is to register each unit and owner at
the factory for safety purposes.
CONTACT YOUR DEALER FOR ANY
REPLACEMENT PARTS OR SERVICE
NEEDED. DO NOT RETURN PARTS
DIRECTLY TO THE FACTORY.
THE FACTORY REQUIRES PRIOR
APPROVAL ON RETURNS, AND
APPROVALS ARE ISSUED ONLY TO
BOLENS DEALERS OR DISTRIBU¬
TORS.
Bolens Corporation reserves the right to
make changes in specifications shown
herein, add improvements, or discontinue
the manufactured product at any time
without notice or obligation.
The illustrations shown throughout this
manual may not look exactly the same as
your snow thrower. Production line
changes as well as differences in models
may alter their appearance.
Know your snow thrower before you
operate it. Carefully review this manual
and become thoroughly familiar with the
operating procedures and safety pre¬
cautions.
TABLE OF CONTENTS
Safety Precautions . .
Identification Numbers
Specifications.
Assembly.
Controls.
3 Before Operation. . . .
4 Operation.
5 Care and Maintenance
5 Storage .
6
2
CD
00