Bolens 824A - PRE-OPERATIONAL CHECK

ATTENTION: OWNERS OF BOLENS® 8 AND 10 HP SNOWTHROWERS
SUPPLEMENT TO THE SAFETY AND OPERATION INSTRUCTIONS MANUAL
FOR BOLENS® LARGE FRAME SNOWTHROWERS
MODELS 624, 824. 824A, 1026 AND 1032
(This information is in addition to information in your Owners Manual,
Form 4210-2).
Keep this sheet with your owners manual. Please insert between
Pages 6 and 7.
PRE-OPERATIONAL CHECK
Before starting the engine on your BOLENS® snowthrower , please operate
the auger and wheel drive levers to make sure they release freely
(return to neutral) .
If levers do not operate freely, spread lower portion of both levers
outward to provide clearance of 1/16" between the lever and handle
(see illustration). Levers can be spread apart with an adjustable
wrench or pliers.
Form 4374-1