Assembly Instructions:-
Place 2 leg tubes together and line up the holes on the two adjacent upstanding legs1.
Push a hex socket bolt (4) through the lined up holes and fasten with a locking nut (3), use the Allen 2.
key and suitable spanner to tighten
Repeat steps 1 and 2 for the other ve xing points on the legs3.
Place the table top face down on a level oor (use protection to prevent the surface from being 4.
scratched).
Pass the screw (5) through the plastic tting (6) (with the curved side of the tting wrapped around 5.
the table leg)
With the holes in the upturned legs lined up with the underside of the table top, attach the legs to the 6.
table top
The plastic ttings are provided to protect the stainless steel top when the tables are stacked.7.
Caution : Do not store upside down as this can cause water ingress8.
The Bolero Helpline telephone number is 0845 146 2887
Bolero, Fourth Way, Avonmouth, United Kingdom, BS11 8TB.
Code U431 & CG836:- Bolero Round Stacking Table
Pack Contents:-
Stainless steel top x 11.
Leg tube x 32.
Locking nut x 63.
Hex socket bolt x 64.
Posi head screw x 65.
Plastic tting x 6 6.
1 x Allen Key
To Next Page
Need help?
General