Release the screw in the base of the
hand grip.
Pull off the top half of the hand grip
and remove the battery container.
Unscrew the lid retaining screw and
remove the lid.
Insert five batteries in correct posi-
tion: the
+
pole of each battery must
be next to a
+
sign on the container.
Close the container by replacing the
lid and tightening the screw.
Insert the battery container in the
hand grip so that the three contact
points at one side of the container
are in contact with the springs inside
the hand grip. Replace the top cover
of the hand grip and tighten the
locking screw.
3
- - - - ----------------
To Next Page
Loading...
