bolid S2000-BI - User Manual

1
INDICATOR MODULE
S2000-BI, S2000-BI Rev.02
INSTRUCTION MANUAL
1 TECHNICAL INFORMATION
1.1 General
1.1.1 S2000-BI / S2000-BI Rev.02 Indicator Module (hereinafter referred to as the module) is
designed to operate as a part of an Orion integrated security system under the network controller
(S2000M control panel or Orion Pro Software Suite) together with control and indicating equipment
Signal-10, Signal-20, Signal-20M, Signal-20P Rev.01, Signal-20P SMD, S2000-4, or S2000-KDL
polling loop controller. To be part of a modular control and indicating device the module shall be
used only with an S2000M control panel of versions 3.00+.
1.1.2 The module provides light and sound indication of conditions of partitions (zones). The
module is to be installed inside protected premises and is intended for round-the-clock operation.
1.1.3 For monitoring a fire alarm system use the Fire Alarm indication type, and for
monitoring fire-fighting equipment use the Operated Appliance indication type.
1.1.4 The module is not intended to be operated in aggressive and dusty environments and in
ex-hazardous premises.
1.2 Specifications

Light Indication
-
60
two
-
color
LEDs
to indicate conditions
of
up to
60 partitions of Orion ISS
- 8 single-color LEDs to display
alarms and troubles
in Orion ISS
- One LED to indicate the module conditions
- One LED to show that a sound is silenced
- One LED to show whether or not operating by
iButton is permitted

Built
-
in Buzzer
-
Yes

Tamper Switch
-
Yes

RS
-
485
Port
(
to operate as part of an Orion ISS
)
-
Yes

Power Voltage
-
10
.
2
–
28
.
4
VD
C
.
Bolid manufactured battery backed power supplies
of RIP
-
12 and RIP
-
24 series are advised to be used

Consumed Power
-
3
W max

Consumed
Current
Alarm mode
Quiescent mode (all LEDs are off)
- 200 mA max at 12 VDC
- 100 mA max at 24 VDC
- 50 mA max at 12 VDC
-
50
mA
max
at
24
VDC

Pre
-
operation Time
-
2
s max

Weight
-
0
.
6
kg max

Programming
-
By means of
U
P
rog.exe

External Reader
-
One iButton reader c
an be connected
to

Content of precious materials
: n
ot subject to inventory accounting in case of storage, disposal
an
d recycling
.
1.3 Standard Delivery
1) S2000-BI (S2000-BI Rev.02) Indicator Module – 1 pc.
2) Instruction Manual – 1 copy
3) Woodscrew 1-3×25.016 GOST 1144-80 with Wall Plug 6х30 – 3 pcs.
4) Package – 1 pc.

bolid S2000-BI Specifications