V LP
Page 2
Table of Contents
Preface
We thank you very much that you have decided for the drilling-milling machine made by supplier.
Change
s The illustration of the drilling-milling machine might in some details deviate from the illustrations
of this operating manual but this will have no influence on the operation of the drilling-milling
machine.
Any changes in the construction, equipment and accessories are reserved for reasons of enhan-
cement. Therefore, no claims may be derived from the indications and descriptions. Errors
exepted!
1 Safety
1.1 Safety warnings (warning notes)............................................................................................. 5
1.1.
1 Classification of hazards.............................................................................................. 5
1.1.2 Further pictograms....................................................................................................... 6
1.2 Proper use .............................................................................................................................. 6
1.3 Possible dangers caused by the drilling-milling machine........................................................ 7
1.4 Qualification of the staff........................................................................................................... 7
1.4.
1 Target group ................................................................................................................ 7
1.5 Safety devices......................................................................................................................... 8
1.5.
1 EMERGENCY-STOP button........................................................................................ 8
1.5.2 Protective cover ........................................................................................................... 9
1.5.
3 Separating protective equipment ................................................................................. 9
1.6 Safety check ......................................................................................................................... 10
1.7 Personnel protective equipment............................................................................................ 10
1.8 For your own safety during operation.................................................................................... 11
1.9 Disconnecting and securing the drilling-milling machine....................................................... 12
1.10 Using lifting equipment.......................................................................................................... 12
1.11 Signs on the drilling-milling machine..................................................................................... 12
2 Technical data
2.1 Power connection.................................................................................................................. 13
2.2 Drilling-milling capacity.......................................................................................................... 13
2.3 Spindle holding fixture........................................................................................................... 13
2.4 Drill-mill head ........................................................................................................................ 13
2.5 Cross table ............................................................................................................................ 13
2.6 Dimensions ........................................................................................................................... 13
2.7 Work area.............................................................................................................................. 13
2.8 Speeds.................................................................................................................................. 13
2.9 Environmental conditions ...................................................................................................... 14
2.10 Operating material................................................................................................................. 14
2.11 Emissions.............................................................................................................................. 14
3 Unpacking and connecting
3.1 Extent of supply .................................................................................................................... 15
3.2 Transport............................................................................................................................... 15
3.3 Storage ................................................................................................................................. 15
3.4 Installation and assembly...................................................................................................... 16
3.4.1 Requirements of the installation site.......................................................................... 16
3.4.2 Load suspension point............................................................................................... 16
3.4.
3 Installation.................................................................................................................. 16
3.4.4 Installation drawing .................................................................................................... 17
3.5 Installation plan .................................................................................................. 18
3.6 Installation plan ............................................................................................... 19
3.7 Installation plan of optional substructure............................................................................... 20
3.8 First use ................................................................................................................................ 21
3.8.1 Cleaning and lubricating ............................................................................................ 21
3.9 Optional accessory................................................................................................................ 22
BF20
To Next Page
Loading...