CONTROLS
& DISPLAY
Key Pad Operation
Press and Hold: means press and hold the key(s) for more than 2s.
Press: means press the key(s) for less than 0.5s.
On/Off
Power On: NFC startup mode: Press the M/Power key briefly to power on the display. The
display will show the sensor area. Use the NFC card close to the sensor for startup. WARNING:
Super Card cannot be used to power on and can lead to unwanted reprogramming. The Super
Card can be used to program your smartphone as an additional NFC Card.
Power Off: When the display is on, press and hold the M/ PowerKey, the display will power off. If
no operation is engaged for 10min (0km/h), the display will automatically power off. Auto-off
time can be set in the Settings.
Power Level
Press the Plus Key or Minus Key to switch power levels. There are 5 levels by default:
0/1/2/3/4/5. 0 means no power.
Toggle Displays
When the display is on, short press the M/Power to toggle among ODO (total range), Trip (single
trip range), MAX (maximum speed), AVG (average speed), V (remaining voltage) TIME (time of
day)
Lights On/Off
Press the light Key to turn lights on, and the light icon will be shown on the display. Press again
to turn lights off.
To Next Page
Loading...
