BOMANN DTE 338 - Page 19

19
Unpacking the Appliance
Unpacking the ApplianceUnpacking the Appliance
Unpacking the Appliance
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE
NOTENOTE
NOTE:
::
:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning and Maintenance”.
Appliance
Appliance Appliance
Appliance Equipment
EquipmentEquipment
Equipment
Appliance overview
Appliance overviewAppliance overview
Appliance overview
1
11
1 4-Star freezer compart-
ment with grid shelf
2
22
2 Temperature control /
interior light
3
33
3 Height-adjustable glass
shelves
4
44
4 Door storage racks
5
55
5 Vegetable box with
glass shelf
Delivery scope
Delivery scopeDelivery scope
Delivery scope
3 x height-adjustable glass shelf, 1 x vegetable box
with glass cover, 4 x door storage rack, 1 x egg tray,
1 x removable grid shelf, 1 x ice-cube tray,
incl. installation material: sealing tape, fixing screws
appliance, fixing screws hinges, cover caps, security
angles
Installation
InstallationInstallation
Installation
Condition
ConditionCondition
Conditions for the installation location
s for the installation locations for the installation location
s for the installation location
Good ventilation is required around the appliance, in
order to dissipate the heat properly and to guarantee
efficient cooling operation at low power consumption.
Sufficient clearance is necessary.
- Refer to the instructions which we give you in
“Built-in”;
- Place the appliance so that the appliance door
can open without being impeded.
• Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to chapter “Technical Data” or to the rating label
located in the interior or on the rear side of the
appliance.
• Look for stable, horizontal appliance position.
• Avoid the installation:
Avoid the installation:Avoid the installation:
Avoid the installation:
- near heaters, next to a stove, direct sunlight or
any other heat sources;
- at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
- near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
- Do not expose the appliance any weather.
Electrical connection
Electrical connectionElectrical connection
Electrical connection
WARNING:
WARNING:WARNING:
WARNING:
• The installation to the mains supply must conform
to the local standards and regulations.
• Improper connection may cause to an electric
electric electric
electric
shock
shockshock
shock!
• Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
• The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.