To Next PageTo Next PageWhat to do if I hear a warning signal and all segments are flashing on my BOMANN EK 6022 CB Indoor Fireplace?
If you hear a warning signal and all segments in the display of your BOMANN Indoor Fireplace start flashing, it means the overheating protection has been activated. First, switch off the appliance using the power switch. Then, let it cool down for at least 15 minutes before switching it on again.
Why my BOMANN EK 6022 CB does not work?
If your BOMANN Indoor Fireplace isn't working, start by checking the wall outlet with another appliance to ensure the outlet is functioning. Also, ensure the plug is properly inserted into the wall outlet and check the fuse. If these steps don't resolve the issue, the appliance may be defective.
What to do if my BOMANN EK 6022 CB is not turning on at the programmed start time?
If your BOMANN Indoor Fireplace is not turning on at the programmed start time, it may be because the appliance has been disconnected from the mains (possibly due to a power failure), which resets the appliance to its basic settings. You should check the settings for the current weekday, the current time, and the timer settings.
How to control the appliance using the remote control.
Instructions for setting the current day of the week and time.
Step-by-step guide to setting timer schedules and temperatures.
How to control the appliance using the remote control.
Instructions for setting the current day of the week and time.
Step-by-step guide to setting timer schedules and temperatures.
General| Brand | BOMANN |
|---|---|
| Model | EK 6022 CB |
| Category | Indoor Fireplace |
| Language | English |
