BOMANN WK 5012 CB - User Manual

Questions and Answers

M
Megan ArnoldJul 29, 2025
Why does my BOMANN WK 5012 CB not switch on?
- C
  Crystal CantuJul 30, 2025
  If your BOMANN Kettle doesn't switch on, there could be several reasons: * **No power supply:** Try plugging another appliance into the same power socket to check if the socket is working. * **Incorrect plug:** Ensure the mains plug is correctly inserted into the power socket. * **House fuse:** Check the house fuse to see if it has blown. * **Overheating:** If the kettle was recently used without water or with too little water, let it cool down for 15 minutes before trying again.
C
christinamontgomeryAug 6, 2025
Why does my BOMANN WK 5012 CB switch off before cooking?
- C
  Curtis HendersonAug 6, 2025
  If your BOMANN Kettle switches off before the water boils, it might be due to: * **Calcification:** The heating base may be severely calcified. Descale the kettle according to the descaling instructions. * **Overloaded circuit:** The electric circuit of the socket could be overloaded. Check the mains connection to ensure it is stable.
A
alicia88Aug 14, 2025
What to do if my BOMANN WK 5012 CB does not switch off?
- N
  Nicole ThompsonAug 14, 2025
  If your BOMANN Kettle does not switch off automatically, it could be because the lid is not properly closed or the filter is not correctly inserted. Ensure the lid is closed until it clicks into place, and replace the filter if necessary.
I
Isabella GrahamAug 21, 2025
How to stop BOMANN Kettle from automatically switching on?
- R
  ruizcliffordAug 21, 2025
  If your BOMANN Kettle switches on again automatically when placed on the base, check the switch position. If the switch is in position I, set it to position O.