Bomet Z655/1 - DISASSEMBLY AND TOTALLING; TECHNICAL CHARACTERISTICS

- 24 -
material type. Uninstalled elements should be grouped and passed to points collecting
metals.
CAUTION
Lifting devices used during disassembly can be operated only by a person properly
authorized and qualified.
8. TECHNICAL CHARACTERISTICS
Technical data of suspended 1-row vibrating digger is listed in table 4.
Table. 4. Technical characteristics of vibrating 1-row diggers
No
Specification
Unit of
measure
Manufacturer data
1.
Symbol
-
Z655
2.
Type of the digger
-
suspended
3.
Working width
-
1-row
4.
Discharge of potatoes
-
side
rear
5.
Dug row spacing
mm
625 -750
6.
Maximum working depth
mm
200
7.
Machine weight
kg
245
135
8.
Overall dimensions in working position
- length
mm
1700
1290
- width
mm
1500
925
- height
mm
1150
900
9.
Power demand (min.)
kW / KM
7.5 / 10
10.
Working speed
km/h
5
11.
PTO shaft - min. moment *
Nm
300
12
PTO shaft - length min / max*
mm
L
min
-510, L
max
-790
13.
Speed of PTO shaft
rpm
540
14.
Efficiency
ha/h
up to 0.22
* - the digger is not equipped with the PTO shaft. Use only shafts with CE marking.
Measurements of geometric dimensions and weights are given in the technical characteristic to an accuracy of 1%.
NOTES