Bona Edge AM0003135 - User Manual

Questions and Answers

L
Lauren Jones DDSAug 9, 2025
What to do if my Bona Edge AM0003135 Sander doesn’t start?
- L
  Leslie CabreraAug 9, 2025
  If your Bona Sander doesn’t start, there could be several reasons. First, ensure that the sander is properly connected to a working power outlet. Try another wall socket. If that doesn’t work, the cable might be broken and needs to be replaced. Also, check if the sanding disc rotation is impossible due to blockage; remove any obstructions and ensure the ventilator runs smoothly.
M
millstiffanyAug 14, 2025
Why is my Bona Sander heavily vibrating?
- C
  Christopher BoydAug 14, 2025
  If your Bona Sander is heavily vibrating, it could be due to an off-center sanding disc. Try to center the sanding disc. Alternatively, the ventilator might be damaged and needs to be replaced.
M
Mr. Jesus MitchellAug 19, 2025
What causes uneven sanding with my Bona Edge AM0003135 Sander?
- L
  Lauren MooreAug 19, 2025
  Uneven sanding with your Bona Sander can result from several issues. Check the wheels: they might be badly adjusted, unevenly worn, or binding. In these cases, you should adjust, change or clean the wheels. Also, ensure the sanding disc isn't loose or binding. Fix or adjust a loose disc, and change the Velcro disc or screw if the sanding disc is binding. Finally, if the steel disc is faltering, replace the steel plate.
C
Christina StevensAug 25, 2025
Why is my Bona Edge AM0003135 faltering?
- P
  pmedinaAug 25, 2025
  If your Bona Sander is faltering, the carbon brushes may be worn out or the carbon brackets may be broken. In either case, you should change the carbon brushes. Another possibility is that the carbon brushes are binding. Try cleaning the carbon brush channel or change the carbon brackets.
D
David ByrdAug 29, 2025
What to do if the sanding disc doesn’t rotate on my Bona Edge AM0003135 Sander?
- A
  Amber ButlerAug 29, 2025
  If the sanding disc on your Bona Sander isn’t rotating, the cogged belt might be broken or worn out. Replace the cogged belt and, if necessary, change the pulley as well.
A
austingrahamSep 3, 2025
How to fix a lamp that is not working on Bona Edge AM0003135?
- M
  myersjenniferSep 3, 2025
  If the lamp on your Bona Sander is not working, the lamp is damaged, so change the lamp.