Bona Plus - Technical Data; Material Specification

4
Bona.com
800.872.5515
Bona
®
Power Station Plus Manual
Technical Data
Material Specication
Electrical Capacity:
7.2 KVA
Working Capacity:
• 30 AMPS via the 230-volt output receptacle
• 20 AMPS via the twin outlet receptacle (all outlets work
simultaneously, see special instructions in "Electrical
Requirements & Wiring Instructions)
Input:
(1) 4-wire, GFI, 230 volt/30 AMP twist-lock
Output:
• (1) 3-wire, 230 volt 30 AMP twist-lock
• (1) 115 volt 20 AMP duplex, straight leg receptacle
Pigtail:
230 volts 30 AMP twist-lock with 10-4 cable to connect
Bona
®
Power Station Plus to the power supply
Dimensions:
5-7/8"W x 12-7/8"H x 5"D
Weight:
29 lbs.
Standard (included on delivery)
Key Article Article Number
A Bona
®
Power Station Plus AM0002417
B 10' 10-4 cable AS1200145 (Order per linear foot)
C 230 volts 30 AMP twist-lock AS1200114
D Operating Manual
We congratulate you on your purchase of the Bona
®
Power Station Plus, a safe and convenient way to protect
your valuable oor sanding equipment from high -or low-voltage power situations. Use it as a power center to
centrally connect your installation and oor sanding equipment. Use it to effectively run your oor sanding and
vacuuming equipment and adjust the power for your 230V units if your power supply drifts from the desired
voltage range.
Carefully read through the entire user manual before you begin working with the machine. This machine is
intended for professional use only.