To Next PageTo Next PageWhat to do if Bond Signature pump does not run?
If the Bond Outdoor Fountain pump isn't running, first, examine the circuit breaker or try a different outlet. Next, ensure the fountain has enough water, as running the pump without sufficient water can damage it. Then, check the pump's flow control settings and adjust the flow. Lastly, inspect the pump's discharge and intake for any dirt or debris.
What to do if Bond Signature Outdoor Fountain pump does not run, or lights are not on?
If your Bond Outdoor Fountain pump or lights aren't working, first, examine the circuit breaker or try a different outlet. Next, ensure the water level in the fountain is adequate. Then, inspect the pump discharge and intake for any obstructions like dirt or debris. Finally, verify the flow control setting on the pump and adjust it as needed.
What to do if Bond Outdoor Fountain pump does not run or lights are not on?
If your Bond Outdoor Fountain's pump isn't running or the lights are off, first check the circuit breaker or try using a different outlet. Also, ensure the water level in the fountain is adequate. Finally, inspect the pump's discharge and intake for any obstructions like dirt or debris.
General| Type | Outdoor Fountain |
|---|---|
| Material | Resin |
| Power Source | Electric |
| Pump Included | Yes |
| Warranty | 1 year |
| Weight | 35 lbs |
Immediate actions to take if you smell gas to prevent fire or explosion.
Covers risks associated with flammable liquids, outdoor use, and improper installation.
Highlights the danger of carbon monoxide in enclosed spaces and its fatal effects.
Unit is for outdoor use only with propane gas; no remote supply allowed.
Procedures for detecting gas leaks and contacting appropriate authorities.
Guidelines for connecting, filling, and inspecting propane gas tanks.
Instructions for handling lava rocks, drying them, and general unit operation.
Specifies required clearances from combustible materials and flammables.
Procedures for lighting, handling flame-outs, and general operation safety.
Details LP gas tank requirements, connections, and deck usage restrictions.
Emphasizes supervision for children and awareness of high surface temperatures.
Mandates electrical grounding according to local or national codes.
Rules for using the lid and inspecting parts before operation.
Pre-assembly checks for parts and required tools for assembly.
Information on chemical exposure and its health risks as per California law.
Ensures stability, warns against sitting/leaning, and advises on splash placement.
Requires GFCI protection and maintaining adequate water levels for pump operation.
Safe practices for operating the pump, cord management, and electrical connections.
Verify control knob is OFF and prepare gas supply system before assembly.
Route water pump plug and place propane tank inside the body.
Attach regulator to cylinder valve and secure propane tank tightly.
Install igniter battery and prepare water pump by removing packaging.
Place lava rocks, level unit, and fill reservoir with water.
Perform a soap and water leak test on all connections before lighting.
Step-by-step guide for lighting the unit and controlling flame intensity.
Procedures for safely extinguishing the flame and turning off the unit.
Ensure the pump is fully submerged before turning it on.
Instructions for draining water to prevent damage or odor during storage.
Always disconnect the propane gas tank before performing any maintenance.
Guidelines for cleaning mild stains, dirt, and keeping the unit clear of debris.
Advice on storing the unit indoors and protecting it from extreme cold.
Regularly check water level and drain for extended non-use or freeze conditions.
Solutions for issues like wet igniter pins, incorrect battery insertion, or broken igniters.
Addresses burner not lighting, gas flow obstructions, or sudden drops in flow.
Remedies for flame blowing out easily due to wind or safety valve activation.
Troubleshooting steps for the pump failing to operate or its hose being blocked.
Critical warnings regarding grounding, voltage, GFCI, and avoiding flammable liquids.
Cautions on disconnecting power, operating without water, and lifting by cord.
Steps for cleaning the pump, impeller, and checking for debris or damage.
Details the one-year warranty and conditions that may void it.
Provides contact details for customer service, including phone and email.
