Bondaire ULB13-HP-09 User Manual (English)

To Next Page

Bondaire Installation & Maintenance Manual

NOTE to INSTALLER

This manual is to aid the qualified HVAC contractor in the installation and maintenance

of all Bondaire mini splits 410a 13 seer or higher beginning with model #’s ULB-13-HP

Please read and understand these instructions prior to installing the unit, failure to

comply with these instructions may result in improper installation, operation and

maintenance, possibly resulting in fire, electrical shock, property damage, personal injury

or death.

Need help?

Do you have a question about the Bondaire ULB13-HP-09 and is the answer not in the manual?

Bondaire ULB13-HP-09 Specifications

General

Highlights essential warnings (WARNING, DANGER) and mandatory safety practices for installation and operation.

Lists components the installer must provide, such as line sets, wiring, and hardware.

Guidance on ballpark sizing and component needs for data rooms, offices, and residential use.

Details on selecting unit location, required clearances, and understanding unit certifications.

Steps for preparing, locating, and mounting the indoor unit, including clearances.

Guidance on preparing the line set, condensate hose, and wiring for routing.

Instructions for locating the outdoor unit and connecting the refrigerant line set.

Procedures for main power wiring, evacuation, and control wiring.

Steps for opening service valves to release refrigerant charge into the line set.

Instructions for energizing the system, starting the indoor unit, and charge requirements.