Boneco F120 Instructions For Use

21
en
CLEANING
SAFETY INSTRUCTIONS
Always unplug the BONECO F120 before you start
cleaning it! Failure to do so can result in electric
shock and fatal injury!
Do not use alcohol or corrosive cleaning agents for
cleaning.
CLEANING THE HOUSING
The BONECO F120 is designed for low-maintenance op-
eration, even when used over many years. In most cases,
a dry cloth can be used for cleaning.
If stubborn dirt is present, clean the housing using a damp
cloth. Add a small amount of dishwashing detergent to
the water.
CLEANING THE FAN BLADES
1. Tilt the fan unit upwards and loosen the safety
screw.
2. Remove the front grill by slightly turning it counter-
clockwise.
3. Unscrew the safety screw in the middle by turning it
clockwise.
4. Remove the fan blade and clean it with a damp cloth.
5. Put the unit back together by following the steps in
reverse order.
6. Attach the front grill with the safety screw. When
doing so, pay attention to the position of the screw
on the front grill.

Boneco F120 Specifications

General

Type	Household blade fan
Airflow	610 m³/h
Placement	Floor
Noise level	55 dB
Blade length	150 mm
Control type	Rotary
Certification	CE, TÜV, EAC
Product color	Black, White
Auto oscillating	No
Number of speeds	3
Vertical rotation angle	0 - 270 °
AC input voltage	220 - 240 V
Power source type	AC
AC input frequency	50 Hz
Power consumption (typical)	20 W

Weight and Dimensions

Width	278 mm
Height	540 mm
Weight	2900 g