10
en
HANDLING
All BONECO “Clean & Cool” Fans are designed for easy
handling. The output is adjusted in four levels using a
single control: 0 › I › II › III › IV
ALIGNMENT
The fan unit can be manually tilted 270 degrees.
The fan unit does not rotate a full 360 degrees.
HEIGHT ADJUSTMENT
All electrical components are completely integrated in the
connector. Therefore, you can adjust the height at any
time by adding connector pieces or by pulling them off
after pressing down the button to unlock them.
For safety reasons, a maximum of two connector
pieces can be used at once for the BONECO F230CC
and a maximum of one for the BONECO F220CC.
HANDLING
270°
To Next Page
Loading...
