EasyManua.ls Logo

BONTEC MWS-001BK - Safety Warning; Required Tools; Component Identification; Supplied Parts

BONTEC MWS-001BK
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Warning: If you do not understand these directions, or have any
doubts about the safety of the installation, please call a qualied contractor.
Check carefully to make sure there are no missing or defective parts. Never
use defective parts. Improper installation may cause damage or serious injury.
Do not use this product for any purpose that is not explicitly specied in this
manual. We can not be liable for damage or injury caused by incorrect
mounting, incorrect assembly, or incorrect use.
Required Tools: Phillips screw driver.
Supplied Parts
Long Square Tube
A (X2)
B (X2)
Short Square Tube
C (X4)
Wheel
D (X1)
Tube Connector
Tube Connector Cover
E (X1)
F (X4)
M6 Socket Plate
G (X2)
Pole Set
H (X4)
Plastic Sleeve
I (X1)
Connecting Tube
J (X2)
Plastic Knob
K (X2)
Shelf Support
L (X1)
Shelf
M (X1)
Top Plate
Right Connecting Plate
N (X1)
O (X1)
Left Connecting Plate
M6 Nut
P (X4)
1