Need help?Do you have a question about the BONTEC MWS-001BK and is the answer not in the manual?
Important safety instructions and precautions for installation and use of the mobile workstation.
List of tools necessary for the correct assembly of the mobile workstation.
Detailed list and visual representation of all parts included in the package.
Instructions for assembling the wheeled base and initial tube connections.
Attaching the long and short square tubes to the tube connectors.
Inserting and securing the adjustable pole sets into the base.
Ensuring the two main vertical poles are at the same height.
Mounting the shelf supports onto the vertical poles.
Attaching the lower shelf support structure and securing the base.
Using knobs to fix the height of the adjustable poles.
Mounting the middle shelf onto the assembled structure.
Attaching connecting plates to the main top plate.
Mounting the assembled top plate structure onto the vertical poles.
Fastening the top plate levers to fix its position.
Placing soft pads on the top plate for device stability.
Instructions for adjusting the workstation's height and top plate tilt angle.
To Next Page
General