Attention:
• I f the keyboard or the computer freeze, switch off both devices and then switch on the
keyboard again.
• Correct operation cannot be guaranteed if the instrument is switched off or the USB
cable disconnected while a MI DI application is operational.
• Leave at least 10 seconds between switching off and switching on the keyboard and
between the disconnection and connection of the USB cable.
• Make sure that the Midi application is closed prior to switching off the instrument of
disconnecting the USB cable. If this should happen, close the Midi application, switch off
instrument then switch it back on again and restart the Midi application.
Important note: in Vista the “Midi Mapper” does not exist. I n Windows XP “Midi mapper”
allows to address Midi data to the Bontempi keyboard or to an other midi destination. For
this OS please to use Jazz+ + program.
To Next Page
Loading...
